Absolutely! You are using XAMPP on Ubuntu (so, Apache from XAMPP, but on Linux), with:

Laravel at port 80 (your main site, e.g. yourdomain.com)
Traccar at port 8082 (backend)
Goal:
All requests to traccar.motoshare.in (over HTTPS) should proxy to Traccar on port 8082.
**Both run on the same server (single IP).

Here’s an exact, copy-paste solution for XAMPP + Ubuntu:

1. Enable Apache Modules

Open a terminal and run:

sudo /opt/lampp/bin/apachectl -M | grep proxy

If you don’t see these, enable them:

sudo /opt/lampp/bin/apachectl -k stop
sudo /opt/lampp/bin/apachectl -k start

sudo ln -s /opt/lampp/etc/extra/httpd-ssl.conf /opt/lampp/etc/httpd-ssl.conf

# Edit /opt/lampp/etc/httpd.conf:
sudo nano /opt/lampp/etc/httpd.conf

# Ensure these lines are present (add if not):
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule headers_module modules/mod_headers.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so

# Save and close (Ctrl+O, Enter, Ctrl+X)

Restart XAMPP Apache:

sudo /opt/lampp/lampp restart

2. Get SSL Certificate for traccar.motoshare.in

(A) Let’s Encrypt (Recommended)

First, install Certbot:

sudo apt update
sudo apt install certbot

Stop Apache (to free up port 80):

sudo /opt/lampp/lampp stopapache

Get the SSL certificate:

sudo certbot certonly --standalone -d traccar.motoshare.in

Certificates will be in /etc/letsencrypt/live/traccar.motoshare.in/

Copy the files for XAMPP Apache:

sudo cp /etc/letsencrypt/live/traccar.motoshare.in/fullchain.pem /opt/lampp/etc/ssl.crt/traccar.motoshare.in.crt
sudo cp /etc/letsencrypt/live/traccar.motoshare.in/privkey.pem /opt/lampp/etc/ssl.key/traccar.motoshare.in.key

Start Apache again:

sudo /opt/lampp/lampp startapache

(B) Self-Signed (for dev/testing only)

sudo openssl req -x509 -nodes -days 365 -newkey rsa:2048 \
-keyout /opt/lampp/etc/ssl.key/traccar.motoshare.in.key \
-out /opt/lampp/etc/ssl.crt/traccar.motoshare.in.crt

3. Configure Apache VirtualHost for traccar.motoshare.in

Edit /opt/lampp/etc/extra/httpd-vhosts.conf
Add this block at the end:

# HTTP: Redirect to HTTPS
<VirtualHost *:80>
    ServerName traccar.motoshare.in
    Redirect permanent / https://traccar.motoshare.in/
</VirtualHost>

# HTTPS: Proxy to Traccar
<VirtualHost *:443>
    ServerName traccar.motoshare.in

    SSLEngine on
    SSLCertificateFile "/opt/lampp/etc/ssl.crt/traccar.motoshare.in.crt"
    SSLCertificateKeyFile "/opt/lampp/etc/ssl.key/traccar.motoshare.in.key"

    # Security Headers
    Header always set Strict-Transport-Security "max-age=31536000; includeSubDomains"
    Header always set X-Frame-Options DENY
    Header always set X-Content-Type-Options nosniff

    ProxyPreserveHost On
    ProxyRequests Off

    ProxyPass / http://localhost:8082/
    ProxyPassReverse / http://localhost:8082/

    # For WebSocket support (Traccar live)
    ProxyPass /api/socket ws://localhost:8082/api/socket
    ProxyPassReverse /api/socket ws://localhost:8082/api/socket

    ProxyTimeout 120
    ProxyBadHeader Ignore

    ErrorLog "logs/traccar_ssl_error.log"
    CustomLog "logs/traccar_ssl_access.log" combined
</VirtualHost>

Note:

Adjust paths if you put the certs elsewhere.
For Laravel/main site, make sure its VirtualHost does NOT conflict with this one.

4. (Optional) Add to /etc/hosts (for local-only testing)

sudo nano /etc/hosts

Add:

127.0.0.1 traccar.motoshare.in

5. Restart XAMPP Apache

sudo /opt/lampp/lampp restart

6. Test

Visit https://traccar.motoshare.in
Should see the Traccar login UI, with a secure padlock.

Quick Checklist

| What? | File/Command |
| --------------------------- | --------------------------------------------- |
| Apache conf | /opt/lampp/etc/extra/httpd-vhosts.conf |
| SSL Cert/Key | /opt/lampp/etc/ssl.crt/, /ssl.key/ |
| Enable modules | Edit /opt/lampp/etc/httpd.conf |
| Restart XAMPP Apache | sudo /opt/lampp/lampp restart |
| Certbot SSL (Let's Encrypt) | /etc/letsencrypt/live/traccar.motoshare.in/ |

If you want to add a Laravel vhost as well (for your main site):

<VirtualHost *:80>
    ServerName yourdomain.com
    DocumentRoot "/opt/lampp/htdocs/your-laravel-public"

    <Directory "/opt/lampp/htdocs/your-laravel-public">
        AllowOverride All
        Require all granted
    </Directory>
</VirtualHost>

Troubleshooting

If Apache fails to start:
Check /opt/lampp/logs/error_log for SSL or proxy errors.
Certbot fails on port 80:
Make sure nothing else (including XAMPP Apache) is running on 80 before running Certbot standalone.

Summary

All requests to traccar.motoshare.in (HTTPS) are proxied to Traccar on localhost:8082.
SSL is set up in XAMPP’s Apache with Let’s Encrypt or self-signed certs.
Laravel continues to run at its own vhost.

If you need any part explained in more detail (like WebSocket proxying, multi-site with Laravel, etc.), just ask!