Poor or bad cable

scmuser created the topic: Poor or bad cable

Symptom: If the client PC is able to link to the network, performance may be poor. The PC may not be able to connect at all.

sgadmin replied the topic: Re:Poor or bad cable

Cause: In networks today, Gigabit to the desktop is common. Gigabit requires four pairs of cable, so anything lower than Category 5 will not work for Gig. In older buildings this must be taken into consideration. In addition, any amount of untwisting of the cable (often near the RJ-45 termination or patch panel) can cause signal loss. This will result in FCS Errors on the switch ports or network adapters.
Resolution: In most cases with cable problems, the cable simply needs to be replaced. If the problem is because the cable has become untwisted, re-terminating the cable may resolve the errors. When supporting new technologies such as Gigabit or Power over Ethernet, the cable must be Cat 5 or better.

Rajesh Kumar

I’m Rajesh Kumar, a DevOps, SRE, DevSecOps, Cloud, and Platform Engineering expert passionate about sharing practical knowledge, real-world experiences, and industry best practices. I have worked at Cotocus and regularly write about technology, travel, investing, health, product reviews, and digital marketing through my various platforms.

I publish technical articles at DevOps School, travel stories at Holiday Landmark, stock market insights at Stocks Mantra, health and fitness guidance at My Medic Plus, product reviews at TrueReviewNow, and SEO and digital marketing strategies at Wizbrand.