Problem 2 – Can’t get an IP address
scmuser created the topic: Problem 2 – Can’t get an IP address Symptom: The network appears down or inoperable. The operating system may alert that an address was not received…
Read more »Can’t connect to the application server
scmuser created the topic: Can’t connect to the application server Symptom: The application the user is trying to open may alert that it cannot connect to the application server. This…
Read more »Incorrect VLAN assignment
scmuser created the topic: Incorrect VLAN assignment Symptom: When installing new services on the network such as wireless or VoIP, VLANs are typically used to isolate this traffic from other…
Read more »Duplex mismatch
scmuser created the topic: Duplex mismatch Symptom: With a duplex mismatch, the connection will work, just poorly. The link lights will become active on both the switch and network adapter….
Read more »Slow application performance
scmuser created the topic: Slow application performance Symptom: The application appears sluggish. It may freeze on a certain screen or halt while accessing data. Often, the network is blamed for…
Read more »Printing Problems
scmuser created the topic: Printing problems Symptom: Printing does not consistently work on the network. A printer may appear available, but print jobs that are sent to it are not…
Read more »Poor or bad cable
scmuser created the topic: Poor or bad cable Symptom: If the client PC is able to link to the network, performance may be poor. The PC may not be able…
Read more »DNS problems
scmuser created the topic: DNS problems Symptom: The user cannot access the internet or key applications. The network appears to be down. sgadmin replied the topic: Re:DNS problems Cause: Domain…
Read more »Wireless client can’t connect
scmuser created the topic: Wireless client can’t connect Symptom: The client can detect the wireless access point, but it cannot connect to the wireless network. sgadmin replied the topic: Re:Wireless…
Read more »Full Security in Your Hand
rajeshatbuzz created the topic: FULL SECURITY in YOUR HAND Anti-spyware application | Anti-rootkit Appliation | Anti Maleware Application Anti-spyware/ Anti-rootkit/ Anti Maleware application Ad-Aware Pro ( www.lavasoft.com/ ) Malwarebytes’ Anti-Malware(…
Read more »The VPN agent is not responding
scmuser created the topic: The VPN agent is not responding Hi, While using CISCO ANYCONNECT VPN client, i get following message The VPN agent is not responding.Please contact your IT…
Read more »How You Can Earn Money From Home With health
joachimmm created the topic: How You Can Earn Money From Home With health Health and wellness products means completely different things to families. Wellness can be defined as ‘the hunt…
Read more »Converting Red Hat Enterprise Linux booting from CLI to GUI
rajeshkumar created the topic: Converting Red Hat Enterprise Linux booting from CLI to GUI I just found very good links where default Command mode can be converted into GUI mode…
Read more »Ignore existing files or update only newer files with rsync
rajeshkumar created the topic: Ignore existing files or update only newer files with rsync Ignore existing files or update only newer files with rsynca Copying from local to remote Note…
Read more »Mount: cannot mount block device //172.19.165.205/d read-only
rajeshkumar created the topic: mount: cannot mount block device //172.19.165.205/d read-only Issues [code language=”css”] root@rkumar11-usa:~/data/share# sudo mount -t cifs //172.19.165.205/d /home/rkumar11/data/share –verbose -o user=rkumar11 mount: block device //172.19.165.205/d is write-protected,…
Read more »How to add new package to apt-get
rajeshkumar created the topic: How to add new package to apt-get wget -q -O – pkg.jenkins-ci.org/debian/jenkins-ci.org.key | sudo apt-key add – sudo sh -c ‘echo deb pkg.jenkins-ci.org/debian binary/ > /etc/apt/sources.list.d/jenkins.list’…
Read more »Error: *** ln doesn’t support –relative ***
rajeshkumar created the topic: configure: error: *** ln doesn’t support –relative *** [code language=”css”] Error while doing ./configure during systemd-217 istall in RHEL 6.5 configure: error: *** ln doesn’t support…
Read more »Disable IPv6 and Enable IPv4 in Red Hat Linux
rajeshkumar created the topic: Disable IPv6 and Enable IPv4 in Red Hat Linux Disable IPv6 and Enable IPv4 in Red Hat Linux check “disable_ipv6″ file to check if IPv6 is…
Read more »Answer some of Linux admin questions…
scmuser created the topic: Answer some of Linux admin questions… 1. How to send an email | check email | reply email attachment using command line?? 2. How do you…
Read more »How to Limit System Resources Using cgroups on CentOS 6
rajeshkumar created the topic: How to Limit System Resources Using cgroups on CentOS 6 How to Limit System Resources Using cgroups on CentOS 6? Answer – Control groups, or cgroups…
Read more »Set password for ost file
scmuser created the topic: set password for ost file How to set password for ost file in Outlook to secure emails?
Read more »Chrome secure saved passwords
scmuser created the topic: chrome secure saved passwords How to secure google chrome saved passwords accessible from others?
Read more »AnyConnect was not able to establish a connection to the specified sec
sgadmin created the topic: AnyConnect was not able to establish a connection to the specified sec I am getting following error while connecting CISCO VPN. AnyConnect was not able to…
Read more »Automatic stop and restart the Cloud server
pasupuleti2 created the topic: Automatic stop and restart the Cloud server How to scheduling an automatic stop and restart the Cloud server every Saturday. We are using Windows 2012 server…
Read more »Checkstyle reports different issues on different r
rajeshkumar created the topic: Checkstyle reports different issues on different r Checkstyle reports different issues on different runs I’m seeing something strange with the checkstyle plugin. We are using Checkstyle…
Read more »Integration of Sonar in IDE
rajeshkumar created the topic: Integration of Sonar in IDE Integration of Sonar in IDE to enable instant feedback to developer Proposals from both Evgeny and Andrew have been accepted for…
Read more »Calculate KLOC (added, deleted, updated) ?
rajeshkumar created the topic: calculate KLOC (added, deleted, updated) ? Hi, I am looking for a tools which help me to calculate KLOC (added, deleted, updated) ? RSM is the…
Read more »KLOC tools reasearch
scmuser created the topic: KLOC tools reasearch I was going through the www.powersoftware.com I have requirement to KLOC process which not only gather the matrix but also, Create a delta…
Read more »Creating xml report using Cloc
rajeshkumar created the topic: Creating xml report using Cloc Hi, Cou;d you please help me on following command as following command is not able to generate CLOC reports for me….
Read more »Tools for Line of Code Metrix
rajeshkumar created the topic: Tools for Line of Code Metrix Dear, Please find a list of Tools which will help you out for LOC(Lines of Code), SLOC, KLOC(Kilo Line of…
Read more »